Rf Port; Accessories; Figure 12: Subscriber Rf Connector (Under Base); Figure 13: Subscriber Accessory Mounting Components - Redline Communications RedMAX SU-IIR User Manual

3.3.3

RF Port

An RF connector is provided for connection to the integrated antenna. A short
coaxial cable connects the transceiver to the integrated antenna. The transceiver
RF port is used for sending/receiving the RF signal to/from the antenna. This port
can also be used for connection to an optional external antenna.
3.3.4

Accessories

The subscriber is powered using the supplied auto-sensing 110-240 (nominal)
VAC indoor power adapter. The power input connection is located on the bottom
of the subscriber unit. The subscriber includes mounting options to accommodate
desktop, windowsill, and wall mount.

Figure 13: Subscriber Accessory Mounting Components

70-00057-01-01-DRAFT
RedMAX

Figure 12: Subscriber RF Connector (Under Base)

Proprietary Redline Communications © 2006
Page 22 of 60
™
Subscriber Modem
User Manual
December 13, 2006