5.3.7
loadImage - Download and Activate Software Image
The loadImage command can be used to update the subscriber using the SMC
channel (via the base station Ethernet port) or using the local Ethernet connection
(via the PoE adapter).
The following provides and example update session. The subscriber will reboot
using the new image automatically following a successful download.
Login: admin
Password:
admin, welcome to the SS CLI. (Version 0.3)
SUO#> loadImage
Server IP Address: [enter ftp server IP address here]
File Name: [enter binary file name here]
Opening FTP connection.....Done
Downloading image
..............................................................................................................
Done
Programming update........Done
Erasing setup partition. Done.
Writing setup partition. Done.
Erasing boot block. Done
Programming boot block. Done
Flash programming complete.
SUO#>reboot
70-00057-01-01-DRAFT
RedMAX
Example Download Dialog with Subscriber
Proprietary Redline Communications © 2006
Page 40 of 60
™
Subscriber Modem
User Manual
December 13, 2006