4.3.4
Outdoor Subscriber Power Supply
This section describes the physical characteristics of the outdoor subscriber power
block.
Figure 18: Outdoor Subscriber Power-over-Ethernet (PoE) Module
The indoor Power-over-Ethernet (PoE) power block operates as auto-sensing 110-
240 (nominal) VAC. The power block provides two Ethernet interfaces:
<
Important -- Warranty Information -- PoE Equipment
The outdoor subscriber factory warranty is valid only if the Redline
supplied Power Over Ethernet (PoE) power adapter is used.
Refer to the technical specifications in this manual for a list of Redline
approved PoE equipment.
Figure 19: PoE Connection to DATA & POWER OUT Port
DATA & POWER OUT
DATA IN
70-00057-01-01-DRAFT
RedMAX
Table 6: System - PoE Ports
LED
The auto-sensing 10/100Base-T Ethernet port (RJ-
45 socket) port is used to carry signal and power to
the outdoor subscriber outdoor unit.
The auto-sensing 10/100Base-T Ethernet port (RJ-
45 socket) for connection to the network
equipment.
Proprietary Redline Communications © 2006
™
Subscriber Modem
Page 27 of 60
User Manual
December 13, 2006