Disassembly; Transportation, Storage, Disposal - Burkert AirLINE 8652 Quick Start Manual

Transportation, storage, disposal

message possible cause
Wire Break Wire break at input
ch. x x of the position
feedback unit
(position feedback
or plug-in con-
nection defective)
11

disassemBly

Danger
risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, secure the actuators
against moving.
▶ Before working on the device or system, switch off the pres-
sure. Vent or drain lines.
WarnIng
risk of injury due to electric shock.
▶ Before working on the device or system, switch off the power
supply. Secure against reactivation.
▶ Observe applicable accident prevention and safety regula-
tions for electrical equipment.
risk of injury due to improper disassembly!
▶ Disassembly may be carried out only by trained technicians
and with the appropriate tools!
→ Loosen the pneumatic connection.
→ Loosen the electrical connection.
Type 8652
corrective action
Check position
feedback/plug-in
connection
or
replace position
feedback
12 TransporTaTion, sToraGe,
disposal
noTe
Transport damage due to inadequately protected devices.
▶ Protect the device against moisture and dirt in shock-resis-
tant packaging during transportation.
▶ Observe permitted storage temperature.
incorrect storage may damage the device.
▶ Store the device in a dry and dust-free location.
▶ Storage temperature -10...+60 °C.
damage to the environment caused by device components
contaminated with media.
▶ Dispose of the device and packaging in an environmentally
friendly manner.
▶ Observe applicable disposal and environmental regulations.
english
33