Electrical Connection - Siemens SINAMICS S120 Equipment Manual

7.3.6

Electrical connection

Required tools:
● Hexagon-socket spanner (size 6)
● Suitable tool for tube clips (e.g. flat-bladed screwdriver)
Table 7-16 Electrical connection of the DC link adapter for a 150 mm component
Route the cable through the tube clip and insert it into the
DC link adapter.
Secure the tube clip.
Only shielded connection cables should be used.
The DC link adapter can be fitted on the right or left.
Booksize Power Units
Equipment Manual, (GH2), 07/2007, 6SL3097-2AC00-0BP5
Secure the cable.
The cable is connected.
Accessories
7.3 DC link adapter
409