Siemens SINAMICS S120 Equipment Manual page 349

Booksize power units

Hide thumbs Also See for SINAMICS S120:

Table of Contents

It is only permissible to establish connections to the DC link using the adapters that

SIEMENS has recommended (DC link adapter and DC link rectifier adapter).

The tightening torque of the DC link busbar screws (1.8 Nm, tolerance +30 %) must be

checked before commissioning. After being transported the screws must be tightened.

The DC link side covers are supplied as standard with the components; they can also be

ordered separately, if required (order no.: 6SL3162-5AA00-0AA0).

If used, the 24 V terminal adapter must be screwed into place. The following screw must be

used: EJOT-PT screw K30 x 16. Tightening torque 0.5 Nm.

SINAMICS S120 Booksize Power Units

Equipment Manual, (GH2), 07/2007, 6SL3097-2AC00-0BP5

Booksize DC Link Components

5.3 Control Supply Module