Standards - Siemens SINAMICS S120 Equipment Manual

System Overview

1.8 Standards

1.8 Standards
Table 1-1 Essentially the application-relevant standards
Standards Title
EN ISO 12100-1 Safety of Machinery; General Design Guidelines;
Part 1: Basic terminology, methodology
EN ISO 12100-2 Safety of Machinery; General Design Guidelines;
Part 2: Technical Principles and Specifications
EN 563 Safety of machinery; temperature of services that can be touched; ergonomic data to define
temperature limit values for hot surfaces
EN 954-1 / Safety of machinery; safety-related parts of control systems;
ISO 13849-1 Part 1: General Design Principles
EN 1037 Safety of machinery; avoiding unexpected starting
EN 60146-1-1 Semiconductor converters; general requirements and line-commutated converters;
Part 1-1: Defining the basic requirements
EN 60204-1 Electrical equipment of machines;
Part 1: General definitions
EN 60228 Conductors for cables and insulated conductors; guidelines for the limiting dimensions of round
cables
EN 60269-1 Low-voltage fuses
Part 1: General requirements
IEC 60287-1 to -3 Cables - Calculation of the current carrying capacity
Part 1: Current carrying capacity equations (100 % load factor) and calculating the losses
Part 2: Thermal resistance
Part 3: Main sections for operating conditions
EN 60529 Degrees of protection provided by enclosures (IP code)
EN 60664-X Insulation coordination for equipment within low-voltage systems
Part 1: Principles, requirements and tests
Part 3: Use of coating, potting or moulding for protection against pollution
EN 60721-3-X Classification of environmental conditions
Part 3-0: Classification of environmental parameters and their severities; Introduction
Part 3-1: Classification of environmental parameters and their severities; Long-term storage
Part 3-2: Classification of environmental parameters and their severities; Transport
Part 3-3: Classification of environmental parameters and their severities; stationary use, weather
protected
EN 61000-6-X Electromagnetic compatibility (EMC)
Part 6-1: Generic standard; Immunity for residential, commercial and light-industrial environments
Part 6-2: Generic standards; Immunity for industrial environments
Part 6-3: Generic standards; Generic standard emission for residential, commercial and light-
industrial environments
Part 6-4: Generic standards; Generic standard noise emission for industrial environments
EN 61140 Protection against electric shock; Common aspects for installation and equipment
EN 61158 Digital data communications for measurement and control - Fieldbus for use in industrial control
systems
EN 61800-2 Adjustable-speed electrical power drive systems;
Part 2: General requirements - Rating specifications for low-voltage adjustable frequency a.c.
power drive systems
EN 61800-3 Adjustable-speed electrical power drive systems;
Part 3: EMC - Requirements and specific test methods
32
Equipment Manual, (GH2), 07/2007, 6SL3097-2AC00-0BP5
Booksize Power Units