Table of Contents
Advertisement
VSD Series II Overview
VSD Series II Overview
This chapter describes the purpose and contents of this
manual, the receiving inspection recommendations and the
VSD Series II Open Drive catalog numbering system.
How to Use this Manual
The purpose of this manual is to provide you with information
necessary to install, set and customize parameters, start up,
troubleshoot and maintain the VSD Series II variable speed
drive (VSD). To provide for safe installation and operation of
the equipment, read the safety guidelines at the beginning of
this manual and follow the procedures outlined in the
following chapters before connecting power to the VSD
Series II VSD. Keep this operating manual handy and
distribute to all users, technicians and maintenance
personnel for reference.
Receiving and Inspection
The VSD Series II VSD has met a stringent series of factory
quality requirements before shipment. It is possible that
packaging or equipment damage may have occurred during
shipment. After receiving your VSD Series II VSD, please
check for the following:
14
VSD Series II LIT-12011772—October 2012 www.johnsoncontrols.com
Check to make sure that the package includes the Installation
Manual (LIT-12011772), Quick Start Guide (LIT-12011771)
and accessory packet. The accessory packet includes:
Rubber grommets
●
EMC grounding clamps for power cables
●
Control cable grounding clamps
●
EMC jumper locking clips
●
M4 screw for EMC level change (FS7 only)
●
Additional grounding screw
●
Real time clock battery
●
UL conduit plate
●
Inspect the unit to ensure it was not damaged during
shipment.
Make sure that the part number indicated on the nameplate
corresponds with the catalog number on your order.
If shipping damage has occurred, please contact and file a
claim with the carrier involved immediately.
Note: Do not destroy the packing. The template printed on
the protective cardboard can be used for marking the
mounting points of the VSD Series II VSD on the wall
or in a cabinet.
Advertisement
Table of Contents
Need help?
Do you have a question about the VSD II Series and is the answer not in the manual?