Storage; Service And Warranty - Johnson Controls VSD II Series Installation Manual

Storage

If the frequency inverter is stored before use, suitable
ambient conditions must be ensured at the site of storage:
Storage temperature: –40° to 158°F (–40° to 70°C)
●
Relative average air humidity: <95%, non condensing
●
(EN 50178)
To prevent damage to the DC link capacitors, storage
●
times longer than 12 months are not recommended

Service and Warranty

In the unlikely event that you have a problem with your VSD
Series II frequency inverter, please contact your local sales
office.
When you call, have the following information ready:
the exact frequency inverter part no. (see nameplate)
●
the date of purchase
●
a detailed description of the problem that has occurred
●
with the frequency inverter
If some of the information printed on the nameplate is not
legible, please state only the information that is clearly
legible. This information can also be found on the cover of
the control terminals.
VSD Series II LIT-12011772—October 2012 www.johnsoncontrols.com
System Overview
13