Appendix; Access Codes; Electromagnetic Compatibility Directive - 89/336/Eec - Hydronix Hydro-View HV02 User Manual

Access codes

The Hydro-View supports several levels of operator access, each protected by an
appropriate code which is entered at the Access code option in the Main menu. Facilities
enabled by entering an access code will remain active until a new code is entered.
The access codes are fixed in current models of Hydro-View.
For security reasons, you are advised to remove this page from the manual if necessary
to prevent unauthorised access to the Hydro-View parameters.
Access code
0 (default)
190
213
336
1459

Electromagnetic Compatibility Directive - 89/336/EEC

When installed and operated according to the instructions given in this guide, this
equipment conforms to the requirements of Council Directive 89/336/EEC according to
the following schedule...
Equipment type:
Manufacturer:
Conformity criteria:
Facilities
View main displays and adjust set-point ranges.
View diagnostic displays and calibrate sensor
Engineering level other than communications related
parameters.
Full engineering access.
Reset factory defaults and display factory test page.
Hydro-View interface unit model number: HV02
Hydronix Ltd. 70, Smithbrook Kilns, Cranleigh, Surrey, England
Conducted emissions: EN55011:1991 Group 1 Class A
Radiated emissions: EN55011:1991 Group 1 Class A
Radiated immunity: prEN50082-2:1992
Electrostatic discharge: prEN50082-2:1992
Fast transient/burst immunity: prEN50082-2:1992
HYDRO-VIEW USER GUIDE D0022 REV 1.06

Appendix

79