Material In Use - Hydronix Hydro-View HV02 User Manual

Material in use

The Hydro-View stores calibration settings for up to ten different materials, numbered 1 to
10. You must ensure that the material number in use by the Hydro-View matches the
material being presented to the sensor otherwise you will get erroneous moisture values.
Quite often the selection of material number may be controlled by an external system in
which case you will not be able to adjust the material number from the Hydro-View keypad
although the current setting will be displayed.
To select the material number from the moisture display page...
⇒ Press
⇒ Press
⇒ Press
⇒ Adjust to the required value as described in Changing operating values (p27) and
press
⇒ Return to the current display page by pressing
to display the Main menu. The moisture display item is highlighted.
to highlight the Material in use item.
again. A pop-up will appear.
to accept the new value.
HYDRO-VIEW QUICK START
HYDRO-VIEW USER GUIDE D0022 REV 1.06
29