Trend Display Page - Hydronix Hydro-View HV02 User Manual

The options available on the main menu by default are:-
Moisture display
Trend display
Material in use
Set-point set-up
Access code
These options are considered to be useful to most operators of the unit and therefore do
not require any access code. Additional facilities are described in Advanced user options
and configuration (p31).

Trend display page

uoringains alration(te se -up the)-6(dgis ae)-6f
te the sensogaitpus.
The trend display allows the moisture content to be monitored over a period of time. It is of
chrot rcornder-e the' p pe'n mvies under'pen'( )]TJ01 -1.1976 TD26057 Tw[ste t at the most rctent.10t rad particular use under the following conditions...
Monitoring the effectiveness of mixing action when used with a Hydro-Mix sensor. The
display quite clearly shows the point at which thorough mixing has occurred.
Looking at the variation in moisture content within a batch of material. It is inadvisable
inoccufaces.
Vc1). V1). M%1).
ovepage moisture(A%1).
The default display when power is applied.
A graphical display of moisture and other values plotted against
time.
Displays the current material number and allows this to be
changed.
Allows low and high cut-off operating parameters associated
with the set-point outputs to be adjusted.
Allows access to additional operations.
HYDRO-VIEW QUICK START
HYDRO-VIEW USER GUIDE D0022 REV 1.06
25