Cleaning - Silvercrest SLE 320 C4 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Cleaning

CAUTION
Possible damage to the appliance.
Do not allow any liquids or moisture to get into the appliance.
To avoid irreparable damage to the appliance, never immerse it in water.
Always remove the mains plug from the mains power socket before clean-
ing the appliance.
Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
Do not clean the water tank
damaged.
If required, wipe the casing with a slightly damp cloth.
Remove the water tank
outside before replacing it in the appliance.
To clean the inside of the water tank
handle forward until the pins on the handle are aligned with the grooves
on the water tank
groove on both sides (see figure 5).
Fig. 5
Now, remove the lid upwards from the water tank
Assembly is carried out in the reverse order.
We recommend cleaning the water tank
prevent mould and bacteria. Fill the water tank
add a commercially available detergent. Rinse repeatedly with lukewarm
water. We also recommend disinfection following cleaning. To do this, use
a standard commercial, alcohol-based disinfecting agent or high-proof
alcohol. Both substances are completely harmless if rinsed repeatedly with
lukewarm water afterwards.
18 
GB │ IE │ NI
in the dishwasher. Otherwise, it will be
, pour the water away and dry it well inside and
, remove the cover. To do this, tilt the
. You can now remove the grip by pushing it out of the
.
regularly (every two weeks) to
with lukewarm water and
SLE 320 C4

Advertisement

Chapters

Table of Contents
loading

Table of Contents