Cleaning - Silvercrest SLE 200 A1 Operating Instructions Manual

Cleaning

ATTENTION
Possible damage to the appliance.
► Do not allow any liquids or moisture to get into the appliance.
► Always remove the mains plug from the mains power socket before cleaning
the appliance.
► Do not use aggressive or abrasive cleaning agents, as they may corrode
the surface of the casing.
♦ If necessary, wipe the housing with a slightly damp cloth.
♦ Clean the ventilation openings regularly with a suitable soft brush to remove
dust and dirt.
♦ Remove the water tank 6, pour out the water and dry it well inside and
outside before placing it back in the appliance.
♦ We recommend cleaning the water tank 6 every two weeks to prevent
mould and bacteria. Fill the water tank 6 with lukewarm water and add
some washing-up liquid. Rinse several times with lukewarm water. We also
recommend disinfection following cleaning.
To do this, use any standard commercial, alcohol-based disinfecting agent
or high-proof alcohol. Both substances are completely harmless if followed
by repeated rinsing with lukewarm water.
■ 82 │ GB │ MT SLE 200 A1