Cleaning - Silvercrest SLE 320 D5 Operating Instructions Manual

Cleaning

CAUTION
Possible damage to the appliance.
► Do not allow any liquids or moisture to get into the appliance.
► To avoid irreparable damage to the appliance, never immerse it in water.
► Always remove the mains plug from the mains power socket before clean-
ing the appliance.
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
► Do not clean the water tank 4 in the dishwasher. Otherwise, it will be
damaged.
♦ If required, wipe the casing with a slightly damp cloth.
♦ Remove the water tank 4, pour the water away and dry it well inside and
outside before replacing it in the appliance.
♦ To clean the inside of the water tank 4, remove the cover. To do this, tilt the
handle forward until the pins on the handle are aligned with the grooves
on the water tank 4. You can now remove the grip by pushing it out of the
groove on both sides (see figure 5).
Fig. 5
♦ Now remove the lid from the water tank 4 by grasping the two holes
on the left and right in the lid with your fingers and then pulling the lid
upwards..
♦ Assembly is carried out in the reverse order.
♦ We recommend cleaning the water tank 4 regularly (every two weeks) to
prevent mould and bacteria. Fill the water tank 4 with lukewarm water and
add a commercially available detergent. Rinse repeatedly with lukewarm
water. We also recommend disinfection following cleaning. To do this, use
a standard commercial, alcohol-based disinfecting agent or high-proof
alcohol. Both substances are completely harmless if rinsed repeatedly with
lukewarm water afterwards.
■ 18 │ GB │ IE │ NI │ CY
4
SLE 320 D5