Electrolux EOB8857AAX User Manual page 24

24 www.electrolux.com
Saving a programme
1. Turn on the oven.
2. Set a heating function or an
automatic programme.
3. Press
display shows: SAVE.
4. Press
The display shows the first free memory
position.
5. Press
6. Enter the name of the programme.
The first letter flashes.
7. Press
8. Press
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold
You can overwrite a memory position.
When the display shows the first free
memory position, press
press
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Turn on the oven.
2. Select the menu: Favourites.
3. Press
4. Select your favourite programme
name.
5. Press
10.2 Using the Child Lock
When the Child Lock is on, the oven
cannot be turned on accidentally.
1. Press
2. Press
until the display shows a message .
To turns off the Child Lock function
repeat step 2.
again and again until the
to confirm.
to confirm.
or to change the letter.
.
to save.
or
to overwrite an existing
to confirm.
to confirm.
to turn on the display.
and at the same time
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
turn it on only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press
display shows: Function Lock.
4. Press
To turn off the function, press
display shows a message. Press
again and then
When you turn off the oven,
the function also turns off.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
and
1. Turn on the oven.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
again and again until the
to confirm.
to confirm.
again and again until the
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
. The
) to start