Multilinx Selectmap Pin Descriptions (J12-J13); Table 10: Connector J13-Flying Lead Set #1 - Sundance Spas SMT398 User Manual

Version 1.1.1

MultiLINX SelectMap Pin Descriptions (J12-J13)

Signal Pin Function
Name
PWR 2 Power.
Supplies VCC to cable (Works at multiple voltages 5V, 3.3V, and
2.5V).
GND 4 Ground.
Supplies ground reference to cable.
CCLK 6 Configuration Clock is the configuration clock pin, and the default
clock for readback operation.
DONE 8
Done/Program.
(D/P)
Indicates that configuration loading is complete, and that the start-
up sequence is in progress.
PROG 12 Program.
A Low indicates the device is clearing its configuration memory.
Use the Active Low signal to initiate the configuration process.
INIT 14 Initialize.
Initialization sequencing pin during configuration (indicates start of
configuration).
A logical zero on this pin during
Configuration indicates a data error.

Table 10: Connector J13-Flying Lead Set #1

Page 37 of 38 SMT398 User Manual