ABB IM300-I Operational Manual page 53

shows "2", means the relay 2.
Operation method of relay 2 and the relay 1 is exactly the same, please refer to
the operation method of relay 1.
Screen 3：Clear SOE of switching value
This page is used to clear SOE record of switching value. As
shown in fig. 3-4-5, "CLR
and "SOE" is displayed at the top of the screen.
If you do not want to clear the
will skip this screen; if you want to clear, please press the
button, the screen becomes as shown in fig. 3-4-6. Select the "Y"
that is YES, to confirm the removal of SOE, select "N" that is NO,
not clear SOE.
Screen 4：Clear SOE of the overlimit alarm
This page is used to clear SOE record of the overlimit alarm. The upper left
corner of the screen displays "CLR
displayed at the top of the screen, indicating that the overlimit
alarm SOE is cleared. Operation method and display similar to
the third screen
Screen 5 ： Clear the accumulated value of electricity
measurement
This page is used to clear the accumulated value of
electricity measurement. As shown in fig. 3-4-7, the upper left corner of the screen
displays "CLR" (CLEAR) means clear, the top of the screen displays "ENGY"
(ENGERY) means clear the electric base, The operation to clear the accumulated
value of electricity is the same as clearing the SOE.
IM300 Intelligent Power Monitoring Instrument
a " is shown in the upper left corner,
, press the SOE button
b ". The word "SOE" is
51
Fig 3-4-5 Clear SOE of switching
value
Fig 3-4-6 Confirm the
removal of SOE
Fig 3-4-7 Clear the accumulated
value of electricity measurement