ABB IM300-I Operational Manual page 18

Screen 6: Display the total active power P
power Q , total apparent power S
∑
The parameter value is shown in fig 3.2.6:
P∑=0.717KW； Q∑=0.114Kvar；
S∑=0.726KVA；F=50.03Hz
Screen 7: Display A-phase active power Pa, A-phase
reactive power Qa, A-phase apparent power Sa and
frequency Fa.
The parameter value is shown in fig 3.2.7:
Pa＝0.239KW；Qa＝0.038Kvar；
Sa＝0.242KVA；Fa＝50.03Hz.
Note: This screen will be displayed when the connection
mode is set as 3-phase 4-wire.
Screen 8: Display B-phase active power Pb, B-phase
reactive power Qb, B-phase apparent power Sb, frequency Fb.
The parameter value is shown in fig 3.2.8:
Pb＝0.239KW；Qb＝0.038Kvar；
Sb＝0.242KVA；Fb＝50.03Hz.
Note: This screen will be displayed when the connection
mode is set as 3-phase 4-wire.
Screen 9: Display C-phase active power Pc, C-phase
reactive power Qc, C-phase apparent power Sc, frequency Fc.
The parameter value is shown in fig 3.2.9:
Pc＝0.239KW；Qc＝0.038Kvar；
Sc＝0.242KVA；Fc＝50.03Hz.
Note: This screen will be displayed when the connection
mode is set as 3-phase 4-wire.
IM300 Intelligent Power Monitoring Instrument
total reactive
∑,
and frequency F
∑
16
Fig 3.2.6 Total power parameter
and frequency
Fig 3.2.7 Power parameter and
frequency of phase A
Fig 3.2.8 Power parameter and
frequency of phase B
Fig 3.2.9 Power parameter and
frequency of phase C