ABB IM300-I Operational Manual page 44

represent 8 kinds of alarm related relays, as the following table:
Alarm association type code
①
②
③
④
⑤
⑥
⑦
⑧
Alarm associated relays range from 0 to 2, 0 stands for no relays; 1 stands
for relays 1; 2 stands for relays 2.
Note: A relay can not be associated with multiple alarms at the same time.
Relay associated alarm, no longer subject to local and remote control.
creen 21：System time settings
S
This page is used to set the system time. The
upper display shows the word "TIME", indicates
the page to the system time setup page, as shown in
fig. 3-3-20.
As shown, showing at 16:19 on December 10
2008.。
creen 22：Password protection settings
S
This page is used to set the system password
protection. Top of the screen displays the words "button",
expressed this page to protect your password settings
page, as shown in fig. 3-3-21.
Password has been set will be displayed on the screen,
the password range 0000 to 9999.
Note: The parameter settings and local operations
with this password.
IM300 Intelligent Power Monitoring Instrument
Explanation
Low power factor alarm associated relay
Over frequency alarm associated relay
Low frequency alarm associated relay
Over voltage alarm associated relay
Low voltage alarm associated relay
Over ground current alarm associated
relay
Zero-current alarm associated relay
Over current alarm associated relay
42
Fig 3-3-21 Password protection
settings page