ABB IM300-I Operational Manual page 47

"kvarh" expressed as reactive power, "a" represents the A-phase, "b" represents phase
B, "c" represents a C-phase. Similar methods of operation and the Twenty-screen
display.
creen 35：Setting the base absolute value of total forward active energy
S
This page is used to setting the base absolute value of total forward active
energy . As shown in fig. 3-3-26: the top of the screen shows the "total" and "+ EP",
the base value is displayed at the bottom of the screen and the range is from 0 to
99999999.9kWh.
creen 36： Setting the forward base value of total active energy at sharp rate
S
This page is used to setting the forward base value of total active energy at sharp
rate, similar to the methods of operation and the display screen with the twenty-sixth.
creen 37~39:Setting the forward base value of total active energy at peak,
S
shoulder or off-peak rate
They are used to setting the forward base value of total active energy at peak,
shoulder, off-peak rates. Top of the screen displays "+ EP" type rate were similar peak,
shoulder, off-peak, methods of operation and the display screen and twenty-sixth.
creen 40：Setting the base absolute value of total reverse active energy
S
This page is used to setting the base absolute value of total reverse active energy .
Top of the screen display similar to "-EP", methods of operation and the display
screen and twenty-sixth.
creen 41~44 ： Setting the reverse base value of total active energy at
S
sharp,peak, shoulder or off-peak rate
They are used to setting the reverse base value of total active energy at
sharp,peak, shoulder or off-peak rate. Top of the screen displays "-EP" rate type were
sharp,peak,shoulder, off-peak, methods of operation and display screen similar to the
IM300 Intelligent Power Monitoring Instrument
45