ABB IM300-I Operational Manual page 45

creen 23：Period rates setting 1
S
This page is used to set 00:00 ~ 06:00 of the period
rates. Top of the screen displays "ET-1" displayed, it
indicates this page to set the period rates 1, as shown in
fig. 3-3-22.
Each digit represents a step time (0.5 hours), the
display time period after activation, each number ranging
from 1 to 4, the representative rates in the following table:
Rate Type Code
1
2
3
4
creen 24：Period rates setting 2
S
This page is used to set 06:00 ~ 12:00 of the period rates. Top of the screen
displays "ET-2" words, similar methods of operation and the
display screen and the fourteenth.
creen 25：Period rates setting 3
S
This page is used to set 12:00 ~ 18:00 of the period rates.
Top of the screen displays "ET-3" words, similar methods of
operation and the display screen and the fourteenth.
creen 26：Period rates setting 4
S
This page is used to set the 18: 00 hours fee rates: 00 to 24.
Top of the screen displays "ET-4" words, similar methods of
operation and the display screen and the fourteenth.
creen 27：Setting the base value of total active energy
S
This page is used to setting the base value of total active
IM300 Intelligent Power Monitoring Instrument
Explanation
Sharp,
Rates
Peak Rates
Shoulder
Rates
Off-peak Rates
43
Fig. 3-3-22 Rates setting page.
Fig 3-3-23 Setting the base
value of total active energy
Fig 3-3-24 Setting the base value
of total reactive energy