Table of Contents
Advertisement
The quick coupler is operated as follows:
1. Fit the external water hose to the quick coupler on the trailer.
2. Close self-cleaning filter.
3. Turn handle on Pressure Smart Valve towards Main tank.
4. Turn handle on Suction Smart Valve towards Filling device.
5. Depending on the chemical in question, the agitation valve can
be set on "Agitation". If no agitation is needed, this valve must be clo-
sed.
6. Engage the P.T.O. and start the pump.
WARNING! Do not leave the sprayer whilst filling the tank and keep an on the level indicator in order NOT to over-
fill the tank.
Filling of rinsing tank (optional equipment)
The rinsing tank is situated under the main tank. Only fill this tank with clean water.
The rinsing tank is filled through the inlet, situated beneath the Suction Manifold valves. Water can be filled directly
through the inlet - or through a socket piece (optional equipment) connected to a water hose.
A water level indicator (limpid hose with floating ball) is situated beneath the platform.
Rinsing tank capacity is:
2200/2800: 280 Litres
3200/4200: 420 Litres
Filling of clean water tank (optional equipment)
A clean water tank can be fitted to the platform at the sprayers right
side. Remove tank lid, fill with clean water and reposition tank lid.
Turn the ball valve to open tap. Capacity: 15 litres. The water from
this tank is for hand washing, cleaning of clogged nozzles etc. Only
fill the clean water tank with clean water from the well.
WARNING! Although the clean water tank is only filled with
clean water, this water must never be used for drinking.
5 - Operation
5.7
Advertisement
Table of Contents
