Configure Your Powerline Access Point; Access Your Access Point Management Page - TRENDnet TPL-410AP User Manual

TRENDnet User's Guide
Configure your Powerline Access Point
Access your access point management page
Note: Your access point management page default IP address http://192.168.10.100 or
http://wlan.powerline (when the computer is connected directly to TPL‐410AP's LAN
port) is accessed through the use of your Internet web browser (e.g. Internet Explorer®,
Firefox®, Chrome™, Safari®, Opera™) and will be referenced frequently in this User's
Guide.
If you have changed the default IP address, you will need to ensure that your computer is
configured with IP address settings in the same subnet as the as the access point in order
to access the access point management page. (Ex. Access Point IP address changed to
192.168.0.100 / 255.255.255.0, example computer address 192.168.0.25 /
255.255.255.0).
1. Plug the device into an available wall power outlet within reach of your computer's
network cable.
2. Connect a network cable from your wireless access point network port into your
computer's network port.
© Copyright 2016 TRENDnet. All Rights Reserved.
3. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to
the Appendix on page 55 on how to assign static IP address to your computer)
4. Open your web browser and go to IP address http://192.168.10.100 or
http://wlan.powerline (when the computer is connected directly to TPL‐410AP's LAN
port). Your access point will prompt you for a user name and password.
5. By default, the user name is admin and password is admin. You can also find the
Password on a sticker on the side of the access point and on the label on the back of the
access point. Enter your Username and Password, select your preferred language, then
click Login.
Note: If you have changed the password already such as in the Setup Wizard, you will
need to login using the new password.
Default User Name: admin
Default Password: admin
Note: User Name and Password are case sensitive.
TPL‐410AP / TPL‐410APK
6