TEW-753DAP User's Guide
Client Bridge
When Client Bridge mode is set to 2.4GHz or 5GHz interface of TEW753DAP,
this interface functions as a wireless client connecting to any AP dynamically
(channels and encryptions). The interface bridges the traffic to the Ethernet
and the other wireless interface.
© Copyright 2013 TRENDnet. All rights reserved.
• Connects to any 802.11
wireless AP
• Connects two networks
wirelessly
Client Bridge
Repeater
When Repeater Mode is selected, the selected wireless interface functions
as a wireless repeater and is able to repeat the wireless signal of an access
point. This feature is used to expand your existing wireless network on places
your current access point is unable to reach. Make sure all the settings on
selected interface of the TEW-753DAP matches the wireless access points you
want to repeat in same wireless settings including SSID, channel and wireless
encryption settings.
Repeater
Installation
7