Application Diagram; Connect Wireless Devices To Your Access Point - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide
Front View
Gigabit Port
 Gigabit port: Plug an Ethernet cable (also called network cables) from
your access point to your router and wired network devices
 Power port: Connect the power adapter from your access point power port to
an available power outlet.
 Reset button: Use a sharp tool to press and hold this button for 10 seconds to
reset the access point.
© Copyright 2015 TRENDnet. All Rights Reserved.
Reset
button
Power port
.

Application Diagram

The acces point provides concurrent 867 Mbps and WiFi AC and 300 Mbps WiFi N combined with
AP, Client, WDS and Repeater modes support multiple applications.

Connect wireless devices to your access point

A variety of wireless network devices can connect to your wireless network such as:
 Wireless Laptop computers
 Network media players
 Wireless IP cameras
 Smart Phones
 Gaming Consoles
 Internet enabled TVs
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User's Manual/Guide of your
wireless client device to determine how to search and connect to this router's wireless
network.
See the "Appendix" on page 53 for general information on connecting to a wireless
network.
TEW-821DAP
6