Table of Contents
Advertisement
TRENDnet User's Guide
Configure your Wireless Access Point
Access your access point management page
Note: Your access point management page default IP address
accessed through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®,
Chrome™, Safari®, Opera™) and will be referenced frequently in this User's Guide.
If you have changed the default IP address, you will need to ensure that your computer is
configured with IP address settings in the same subnet as the as the access point in order
to access the access point management page. (Ex. Access Point IP address changed to
192.168.0.100 / 255.255.255.0, example computer address 192.168.0.25 /
255.255.255.0).
1. Plug the wireless access point into an available wall power outlet within reach of your
computer's network cable.
2. Connect a network cable from your wireless access point network port into your
computer's network port.
© Copyright 2014 TRENDnet. All Rights Reserved.
3. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to
the
4. Open your web browser and go to IP address http://192.168.10.100. Your access
http://192.168.10.100
is
5. By default, the user name is admin and password is admin. You can also find the
Password on a sticker on the side of the access point and on the label on the back of the
access point. Enter your Username and Password, select your preferred language, then
click Login.
Note: If you have changed the password already such as in the Setup Wizard, you will
need to login using the new password.
Appendix
on page 55 on how to assign static IP address to your computer)
point will prompt you for a user name and password.
Default User Name: admin
Default Password: admin
Note: User Name and Password are case sensitive.
TPL-410AP / TPL-410APK
9
Hide quick links:
Advertisement
Table of Contents
