Before Use; What's An Incubation Room - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com

What's an Incubation Room?

The Incubation Room is a confined space for setting and operating an incubator.
Because the incubation room environment has a considerable effect on hatch rate, it's recommended to control
the environment for setting up an incubator; there should be little noise and vibration around and temperature
ranging 28℃(82.4˚F) with small variation in temperature.
Especially, if there are frequent occasions when the temperature drops suddenly at night, compared with
daytime, be sure to check from time to time and pay attention so that the incubator is not directly exposed to
sunlight during daytime.
※ When the temperature of incubation room is lower than, recomended setting temperature there could be
water-drop in side of incubation room or water leak on the floor. because of dew condensation.
How to Assemble
[ How to Assemble Main Body ]
1
Please remove all packing from the incubator and parts.
Then, check each part is all present and undamaged.
※ Retain the carton and packing materials to enable
the unit to be repacked.
DIGITAL INCUBATOR
Incubator Hatcher Rcom King suro MX20 User Manual

2. Before use

OUT
Egg Van Cord Egg Van Cord Egg Van Cord
2. Before use
(1) What is an Incubation Room? /
(2) How to Assemble Main Body
IN
Pump Power
Power Cord
(1) What is an Incubation Room? /
(2) How to Assemble Main Body
9