How To Replace The Fuse / Frequently Asked Questions (Faq) - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
▶ Replace with new fuse. ( 250V 2.0A Ø5*20mm )
▶ Reassemble with the opposite order of disassemble.
※ If the cover is not completely closed, moisture
preventing ring will not attached correctly and moisture
can be flow in the PCB part.
Hatching result can be changed by a large number
of factors. Autoelex Co.,Ltd.
will not be held responsible for loss of eggs or chicks
under any circumstances such as hatching failure, user's carelessness, power failure, or malfunction.
Frequently Asked Questions (FAQ)
Troubles
In case hatching rate
is low
When a chick hatches
out earlier than
expected or a
deformed chick
hatches out
When a chick hatches
out later than
expected
When hatching dates
are so different from
each egg
(When all chicks don't
hatch out at the same
time but over a long period)
When intending to
hatching various eggs
at the same time
DIGITAL INCUBATOR
Incubator Hatcher Rcom King suro MX20 User Manual
6. Product Information
Expected Causes (Possibility)
▶When the egg is an unfertilized egg.
▶Getting infected by germs
▶Wrong incubation setting
▶Health condition of mother bird
▶Improper egg turning
▶Setting temperature too high
▶Egg turning was not operating normally
▶Setting temperature too low
▶ Eggs stored for different lengths of time
▶ Diffferent incubation temperatures
▶ Incubation days are different,
so hatching rate falls down.
6. Product Information
(2) How to Replace the Fuse /
Frequently Asked Questions
Countermeasures
▶ Check possibility of egg
surviving
▶ Disinfect the incubator
▶ Check all settings of incubator.
Especially, check them focusing
on the temperature.
▶ Review care of health of mother bird.
▶ Check if egg turning is normal.
▶ Lower temp. setting of the
incubator about 0.5℃(1℉)
ex) 37.5℃ 37.0℃
▶ Check if egg turning function is OFF
▶ Raise temp. setting of the
incubator about 0.5℃(1℉)
▶ ex)37.0℃ 37.5℃
▶ Set limits to egg storage time properly
▶ Check Temperature difference
in the incubator.
(sunlight, temp of incubation room, etc.)
▶ Mark hatching date on eggs and
move them to other incubator
(brooder) just on the marked date.
▶ In case of putting in many eggs
at the same time, it's convenient
to prepare a spare incubator available
as a brooder
(2) How to Replace the Fuse /
Frequently Asked Questions
27