Rcom KINGSURO MAX 20 User Manual page 17

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
How to Start Incubation
▶ If you connect power cord, incubator starts
incubation with factory set conditions.
(Factory setting : Temperature 37.5˚C,
Humidity 45%)
※ Start incubation with required temperature &
humidity for your species of birds.
▶ With incubation start, be sure to place
the incubator on the egg van for
egg turning.
There can be some odor the first time
you use incubator, which is normal.
▶ The first time you connect power, FND light will
blink and pump will work for about 2sec.
Then, incubator version will be indicated on FND
for about 1 sec.
▶ After version indication, buzzer sounds for about
15sec. At the same time, present temp. & humidity
displayed and power failure alarm indication
ⓐ is blinking.
▶ Press
indication.
(Buzzer will be removed automatically after 15sec.)
※ Notice of Power Failure : If power is turned off
and then on again because of power failure or
by mistake, first dot will blink.
Quick Start : If you just connect power,
it automatically starts incubation with factory setting.
(Factory setting : Temperature 37.5℃, Humidity 45%)
▶ Incubator display current temperature and humidity,
and it goes to setting conditions within an hour.
※ The artificial intelligence system memorizes and classifies ambient conditions for keeping optimum
temperature, and temperature can move up slowly at the first stage.
DIGITAL INCUBATOR
Incubator Hatcher Rcom King suro MX20 User Manual
3. Incubation
( 90 degree per an hour.)
button to remove buzzer and alarm
3. Incubation
(2) How to Start Incubation
Pump Power
Egg Van Cord Egg Van Cord Egg Van Cord
Power Cord
①
②
(2) How to Start Incubation
17