How To Use Rcom King Suro Max; How To Set Abnormal High & Low Temp. Alarm; Tip : References Or Useful Suggestions In Using King Suro - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
4. Function Settings
Humidity Setting
▶ When humidity display is blinking, adjust humidity
setting with
(Default setting : 45%)
▶ After setting required humidity, press
once then setting will be stored. Next, "HI" will be
indicated for about 0.5sec. and then maximum
temperature limit will blink.
※ Just press
setting.
Function Key
Function
Dispaly
Default Setting
How to Set Abnormal High Temperature Alarm
▶ Adjust abnormal high temperature value with
or
▶ After setting required value, press
Then, it will go to the next stage, abnormal low temp.
setting with display "LO" for about 0.5 sec.
Abnormal High temperature:
This function gives notice when incubator
temperature is higher than setting temperature
because of abnormal ambient temperature increase.
When room temperature is higher than incubator
temperature, this function works with buzzer.
Here, "HI" and temp. gap are displayed alternatively.
Press OK button to remove buzzer.
4. Function Settings
20
Incubator Hatcher Rcom King suro MX20 User Manual
How to Set Abnormal High Temp. Alarm
or button.
button if you do not need to change
Abnormal High
Temp. Humidity
Temp. Alarm
tEP rH HI
37.5°C 45% 2°C
button. (Default setting : 2°C)
(2) Humidity Ssetting /
button
Abnormal Low Centigrade /
Temp. Alarm Fahrenheit
LO °C / °F
- 3°C
°C
button to save.
(2) Humidity Ssetting /
How to Set Abnormal High Temp. Alarm
Humidity UP Humidity Down
Increase Decrease
DIGITAL INCUBATOR