I Ncubation Start / How To Stop Egg Turning / Incubation Termination; Incubator Initialization / Return To Factory Setting - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
3. Incubation
Turning stop During Incubation
▶ Before 3 days of hatching, disassemble the incubator
from EGG VAN, and place on flat surface for stopping
egg turning. After that, you'd better to remove Divider.
Here, be sure to remove Egg Van power cord only.
Be careful not to take off power cord of incubator.
▶ When incubating various species of eggs at the same
time, you can move the eggs before three days of
hatching to other brooder for easy and clean management.
(You can operate two incubators, and various incubators or brooders are available from
Rcom website .)
In case of altricial birds such as parrots or wild birds, you'd better to turn the eggs once or
twice additionally by your hand.
Incubation Termination
※ There is no specified ON or OFF button
on the incubator.
▶ Just take off the power cord after hatching.
▶ It is not necessary to do Incubator
Initialization with KING SURO 20 incubator
after hatching. Just connect power again
when you want to start incubation again.
Incubator Initialization
▶ This function can be used when user input
wrong setting, or incubation termination.
▶ Press
for about 5sec. then display will show "rSt" and
incubator returns to default setting.
Calibrated setting value will not be initialized with
this function.
[If you need to initialize calibrated setting,
refer to FACTORY SETTING next page.]
3. Incubation
18
Incubator Hatcher Rcom King suro MX20 User Manual
(2) Incubation Start / How to Stop Egg Turning /
Incubation Termination / 4.(1) Incubator Initialization
and button at the same time
(2) Incubation Start / How to Stop Egg Turning /
Incubation Termination / 4.(1) Incubator Initialization
IN
OUT
Pump Power
Power Cord
5sec.
DIGITAL INCUBATOR