Rcom KINGSURO MAX 20 User Manual page 26

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
6. Product Information
Humidity Calibration
※ After temperature calibration, it goes to humidity
calibration.
▶ When humidity display is blinking, adjust humidity
according to your needs with
by 1%.
※ Measurement error of hygrometer which you can
purchase from market is bigger than thermometer's.
If you use this function wrongly, initialize
the incubator to factory setting.
Servicing
All our Rcom digital incubators of Autoelex Co., Ltd. are made by precision systems under strict quality
control. But occasionally some defective products are found on the way of their distribution.
If any problem occurs, then please contact Autoelex service center or distributorsin your country.
We will do our best to solve the problems, if any, for you. This product is designed in modular mode, so
for its repair, if any, a qualified person can replace the part concerned with ease.
How to Replace the Fuse
▶ If power does not turn on even if you connect
the plug, check fuse.
▶ Open the cover as Fig. then you can see fuse
equipped PCB.
Remove damaged fuse with screwdriver.
6. Product Information
26
Incubator Hatcher Rcom King suro MX20 User Manual
(1) How to Calibrate the Temperature & Humidity /
(2) How to Replace the Fuse
and button
(1) How to Calibrate the Temperature & Humidity /
(2) How to Replace the Fuse
Increase Decrease
If you want to up incubator humidity 0.5%,
you should calibrate 0.5% lower in calibration
mode.
DIGITAL INCUBATOR