How To Disassemble And Clean The Incubator - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com

How to Disassemble and Clean the Incubator

Be sure to take off power cord before
cleaning the incubator.
▶ After incubation terminated, never leave
the incubator covered with view window.
Then, moisture inside of the incubator
vaporizes and it can stick to electric part
so that cause operation failure.
Be sure to remove view window and
dry the incubator perfectly.
▶ Remove main controller from
view window. [Refer to the page 10]
▶ Wipe the main controller smoothly with soft brush.
Be careful not to give impact to sensor part
or heating part.
▶ Temp. & Humidity sensor is assembled with
connector for easy replacement in case of trouble.
DIGITAL INCUBATOR
Incubator Hatcher Rcom King suro MX20 User Manual
5. Management
5. Management
(2) How to Disassemble and
Clean the Incubator
IN
OUT
Pump Power
Power Cord
(2) How to Disassemble and
Clean the Incubator
23