Incubation; Incubator Installation - Rcom KINGSURO MAX 20 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com

3. Incubation

Incubator Installation

1
Place Suro incubator on the Egg Van
( egg turning device).
2
Open the power cap, and insert the incubator
power cord and pump power cord.
Be careful and ensure the cords do not get jammed
when you tighten screw bolt.
* If you open power cap, there is a sticker which
is showing rated current in the position of pic.ⓐ.
3
Connect silicon tube end of APS
(Automatic Pumping System) into the
nipple of incubator, and the other
end into PET bottle.
Be sure to check rated current Pic.ⓐ before
connecting power cord to outlet.
Press
pump operation, and it automatically stop
after 2min. If you want to stop pump
operation, press any key.
If you do not insert silicon tube exactly, it will not work properly.
[Refer to the page 13. How to replace silicon tube.]
3. Incubation
16
Incubator Hatcher Rcom King suro MX20 User Manual
button for about 10 sec. for
(1) Incubator Installation
Egg Van Cord Egg Van Cord Egg Van Cord
(1) Incubator Installation
pump -
power cord
ⓐ
power cord
IN
OUT
Pump Power
Power Cord
DIGITAL INCUBATOR