Libelium Waspmote Technical Manual page 31

Pro
This special variant integrates extreme quality sensors, with better performance than the Single or Double lines. In this case,
there is only one type of reference probe and up to 16 different ion parameters can be analyzed in 4 sockets.
Sensor sockets are configured as shown in the table below.
Sensor
Socket
A, B, C or D
E
F
Figure: Sensor sockets configuration for Smart Water Ions model, PRO variant
Note: For more technical information about each sensor probe go to the
Sensor probes allowed for each sensor socket
Parameter
Ammonium Ion (NH ) [PRO]
+
4
Bromide Ion (Br ) [PRO]
-
Calcium Ion (Ca ) [PRO]
2+
Chloride Ion (Cl ) [PRO]
-
Cupric Ion (Cu ) [PRO]
2+
Fluoride Ion (F ) [PRO]
-
Iodide Ion (I ) [PRO]
-
Lithium Ion (Li ) [PRO]
+
Magnesium Ion (Mg ) [PRO]
2+
Nitrate Ion (NO ) [PRO]
-
3
Nitrite Ion (NO ) [PRO]
-
2
Perchlorate Ion (ClO ) [PRO]
-
4
Potassium Ion (K ) [PRO]
+
Silver Ion (Ag ) [PRO]
+
Sodium Ion (Na ) [PRO]
+
pH [PRO]
Reference Sensor Probe [PRO]
Soil/Water Temperature
-31-
Waspmote Plug & Sense! - Encapsulated Line
Reference
9412
9413
9414
9415
9416
9417
9418
9419
9420
9421
9422
9423
9424
9425
9426
9411
9410 (included by default)
9255 (included by default)
Development section in Libelium website.
v6.3