Mac-Os Receiver - Libelium Waspmote Technical Manual

Interacting with Waspmote

27.1.4. Mac-OS receiver

If MAC OS X is used (version later than 10.3.9) the application 'ZTERM' can be used to capture the serial port output. This
application can be downloaded from: http://homepage.mac.com/dalverson/zterm/
This application is configured automatically, establishing the USB on which Waspmote has been connected and the speed.
The following image shows this application capturing Waspmote's output, while the example code 'Waspmote Accelerator Basic
Example' is run.
Figure: Waspmote's output capture
-142- v6.3