Libelium Waspmote Technical Manual page 23

Sensor sockets are configured as shown in the figure below.
Sensor
Socket
A, B, C and F
D
E
Figure: Sensor sockets configuration for Smart Environment PRO model
Note: For more technical information about each sensor probe go to the
Sensor probes allowed for each sensor socket
Parameter
Carbon Monoxide (CO) [Calibrated]
Carbon Dioxide (CO ) [Calibrated]
2
Oxygen (O ) [Calibrated]
2
Ozone (O ) [Calibrated]
3
Nitric Oxide (NO) [Calibrated]
Nitric Dioxide (NO ) [Calibrated]
2
Sulfur Dioxide (SO ) [Calibrated]
2
Ammonia (NH ) [Calibrated]
3
Methane (CH ) and Combustible Gas [Calibrated]
4
Hydrogen (H ) [Calibrated]
2
Hydrogen Sulfide (H S) [Calibrated]
2
Hydrogen Chloride (HCl) [Calibrated]
Phosphine (PH ) [Calibrated]
3
Ethylene (ETO) [Calibrated]
Chlorine (Cl ) [Calibrated]
2
Particle Matter (PM1 / PM2.5 / PM10) - Dust
Temperature, Humidity and Pressure
Waspmote Plug & Sense! - Encapsulated Line
Development section
-23-
Reference
9371-P
9372-P
9373-P
9374-P
9375-P
9376-P
9377-P
9378-P
9379-P
9380-P
9381-P
9382-P
9384-P
9385-P
9386-P
9387-P
9370-P
in Libelium website.
v6.3