Sensors - Libelium Waspmote Technical Manual

27.2.5. Sensors

In section "Sensor List", the user can add new sensors or delete sensors.
By default Meshlium recognize all Libelium official sensors frames. All sensors frames that Meshlium can capture and store must
be specified in an XML file.
The file with official sensors of Libelium is localed in
The button "update sensors" update the Libelium official sensor. User sensors remaining unchanged.
Users can add and remove sensors in an easy and simple from ManagerSystem.
To add a new sensor the user must complete the fields:
• ASCII ID: sensor id for ASCII frame.
• Fields: This field specifies the number of sensor fields sent in the frame. This helps to calculate the frame length.
• Type: type of fields
- uint8_t
- int
- float
- string
- ulong
- array(ulong)
Once all fields are filled in, click on the button "Add sensor"
Figure: Sensor List – Addition
/mnt/lib/cfg/parser/sensors.xml
-160-
Interacting with Waspmote
v6.3