Download Print this page

HDL M/DLP04.1-A2-48 User Manual page 85

Lcd panel controller

Advertisement

APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
segment.
208
Floor Heating
This communication object is used to activate or deactivate the heating for pre-set 2, the heating
status can also be modified using this communication object. The heating settings are stored in a
non-volatile memory segment.
209
Floor Heating
This communication is used to activate or deactivate the timer mode in pre-set 3, the heating status
can also be modified using this communication object. The timer settings are stored in a non-volatile
memory segment.
210
Floor Heating
This communication object is used to set the time for pre-set 3, this command can also be used to
modify the time for pre-set 3. The time settings are stored in a non-volatile memory segment.
211
Floor Heating
This communication object is used to activate or deactivate the heating for pre-set 3, the heating
status can also be modified using this communication object. The heating settings are stored in a
non-volatile memory segment.
212
Floor Heating
This communication object is used to activate or deactivate the floor heating. When a telegram value
of '1' is received, the floor heating will be activated. When a telegram value of '0' is received, the floor
heating will be deactivated.
213
Floor Heating
This communication object is used to trigger switching in the normal mode.
Telegram value: "0": No function
"1": Normal mode
214
Floor Heating
This communication object is used to trigger switching in the day mode.
Telegram value: "0": No function
"1": Day mode
215
Floor Heating
This communication object is used to trigger switching in the night mode.
Telegram value: "0": No function
"1": Day mode
216
Floor Heating
Guangzhou Hedong Electric Co., Ltd. (HDL)
Start/Stop heating for preset 2
Preset 3 Temp. for timer mode
Time of day for preset 3
Start/Stop heating for preset 3
Floor heating(1-ON,0-OFF)
ON CMD for Normal-mode
ON CMD for Day-mode
ON CMD for Night-mode
ON CMD for Away-mode
-
www.hdlautomation.com
DPT 1.010
CWTU
1bit
DPT9.001
CWTU
2 byte
DPT10.001
CWTU
3 byte
DPT 1.010
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
CWTU
DPT 1.001
85 / 88

Advertisement

loading