Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
This communication object is used for setting the normal mode temperature, the temperature value
an also be modified using this communication object. The temperature settings are stored in a
non-volatile memory segment.
200
Floor Heating
This communication object is used to set the day mode temperature, the temperature value an also be
modified using this communication object. The temperature settings are stored in a non-volatile
memory segment.
201
Floor Heating
This communication object is used to set the night mode temperature, the temperature value an also
be modified using this communication object. The temperature settings are stored in a non-volatile
memory segment.
202
Floor Heating
This communication object is used to set the away mode temperature, the temperature value an also
be modified using this communication object. The temperature settings are stored in a non-volatile
memory segment.
203
Floor Heating
This communication object is used to set the timer mode of temperature pre-set 1, the temperature
value can also be modified using this communication object. The temperature settings are stored in a
non-volatile memory segment.
204
Floor Heating
This communication object is used to configure the pre-set 1 time, the time value an also be modified
using this communication object. The time settings are stored in a non-volatile memory segment.
205
Floor Heating
This communication object is used to activate or deactivate the heating for pre-set 1. This
communication object can also be used modify the start/stop settings.The activation/ deactivation
settings are stored in a non-volatile memory segment.
206
Floor Heating
This communication object is used configure the time mode in temperature pre-set 2 , the time value
an also be modified using this communication object. The time settings are stored in a non-volatile
memory segment.
207
Floor Heating
This communication object is used to set the time of day for pre-set 2, the time value an also be
modified using this communication object. The time settings are stored in a non-volatile memory
Guangzhou Hedong Electric Co., Ltd. (HDL)
Day-mode setpoint Temp
Night-mode setpoint Temp
Away-mode setpoint Temp
Preset 1 Temp. for timer mode
Time of day for preset 1
Start/Stop heating for preset 1
Preset 2 Temp. for timer mode
Time of day for preset 2
-
www.hdlautomation.com
DPT9.001
CWTU
2 byte
DPT9.001
CWTU
2 byte
DPT9.001
CWTU
2 byte
DPT9.001
CWTU
2 byte
DPT10.001
CWTU
3 byte
DPT 1.010
CWTU
1bit
DPT9.001
CWTU
2 byte
DPT10.001
CWTU
3 byte
84 / 88
Advertisement
