Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
D.4 Air-condition
Objects "Air-condition"
NO.
Object name
222
Air-condition
This communication object used for control air condition. When a telegram value of '1' is on, when a
telegram value of '0' is off.
223
Air-condition
Temperature
The temperature value can be transmited to KNX bus.HVAC or FCU on the KNX bus can receiving.
224
Air-condition
Temperature
This communication object used for setpoint temperature.
225
Air-condition Fan
226
Air-condition Fan
227
Air-condition Fan
228
Air-condition Fan
These communication objects used for switching air condition's speed. When a telegram value of '1' is
valid, when a telegram value of '0' is invalid.
229
Air-condition Wind
This communication object used for switching air condition wind.
Telegram value "1" start swing
"0" is stop swing
Guangzhou Hedong Electric Co., Ltd. (HDL)
Function
Switch ON/OFF
Actual temperature from EIB
Setpoint temperature
ON CMD for automatic
ON CMD for low speed
ON CMD for medium speed
ON CMD for high speed
Wind swing('1'-swing,
'0'-stop)
-
www.hdlautomation.com
Flags
Data type
DPT 1.001
CWTU
1bit
DPT 9.001
CWTU
2 bytes
DPT 9.001
CWTU
2 bytes
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.001
CWTU
1bit
DPT 1.010
CWTU
1bit
87 / 88
Advertisement
