Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
HVAC System
28
->HVAC control moe type
29
->HVAC moe type
30
Fan speed
31
->Fan control type
->Fan control type
32
33
-->Speed 1 value
34
-->Speed 2 value
35
-->Speed 3 value
->Fan status type
Fan status type
36
The status operation after
power on
37
--Delay for status
38
recovery(2...255s)
LED status
39
Guangzhou Hedong Electric Co., Ltd. (HDL)
-2-pipe system
-4-pipe system
-1bit command
-1byte mode
-1bit command
-1byte mode
-1-Fan speed
-2-Fan speed
-3-Fan speed
-1bit object
-1byte object
0...(85)...255
0...(170)...255
0...(255)
-1bit object
-1byte object
-Unchange
-Recovery
2...(5)...255s
-Flashing
-Press= "ON", Release=
"OFF"
-
www.hdlautomation.com
Via EIB: The display actual
temperature is depend on other
devices via EIB.
2-pipe system: There is one single
water circuit that is filled with
cooling or heating medium
according to the season.
4-pipe system: The system consists
of two separate water circuits for
heating and cooling.
Set the HVAC control moe type.
Set the HVAC moe type.
1-Fan speed: If you select this one,
HVAC has 1 fan speed only.
2-Fan speed: If you select this one,
HVAC has 2 fan speeds can be
setting.
3-Fan speed: If you select this one,
HVAC has 3 fan speeds can be
setting.
Set the fan control type.
Set the value of speed 1.
Set the value of speed 2.
Set the value of speed 3.
Set the fan status type.
Unchange: The status operation
remain unchange after the power
on.
Recovery: The status operation
recovery after the power on.
Set the delay time for status
recovery.
Flashing: Press the button, the LED
status flahing.
Press= "ON", Release= "OFF":
50 / 88
Advertisement
