Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
No.
ETS-Parameter
=>Temperature show mode
Temperature show mode
1
=>Local temperature
The local temperature
correction(-5C...+5C)
2
Local temperature report(In
3
range)
->Temperature=>Threshold1
4
(-30C...+99C)
->Temperature=>Threshold2
5
(-30C...+99C)
--Temperature report mode
6
--Temperature report of
7
check period(1...65535s)
=>Information zone of rocker page
Display date and time
8
Display temperatur(Celsius
9
degrees)
Display temperatur(Celsius
degrees)
10
--Temperature correction
11
value(-5C...+5C)
Scrolling information
12
displayed time
interval(5...255s)
Guangzhou Hedong Electric Co., Ltd. (HDL)
Range (default)
-Degrees Celsius
-Degrees Fahrenheit
-5C...(0C)...+5C
-No
-Yes
-30C...(0C)...+99C
-30C...(0C)...+99C
-Report when changed
-Report cyclic
1...(5)...65535s
-No
-Yes
-No
-Yes
-Local sensor
-Via EIB
-5C...(0C)...+5C
(5)...255s
-
www.hdlautomation.com
Description
Set temperature show mode:
Celsius(C)
Fahrenheit(F)
DLP panel embedded with a
temperature sensor, sometimes
has deviation, you can correction
it by set the parameter.
Report the local temperaturein
range.
Set the temperature show
threshold1.
Set the temperature show
threshold2.
Report when changed: The
temperature is reported when the
temperature changed.
Report cyclic: Always report
temperature values in a loop.
Set the time for temperature
report of check period.
Set the rocker page whether dislay
date and time.
Set the rocker page whether dislay
temperatur(Celsius degrees) .
Local sensor:The display
temperature is read through the
local sensor.
Via EIB: The display temperature is
controlled via EIB.
Set the temperature correction
value.
Set the DLP panel scrolling
information displayed time
interval.
10 / 88
Advertisement
