Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
actuator
=>Information zone
Display date and time
17
Display information
18
Display picture of the
19
controlled device
Scrolling information
20
displayed time
interval(5...255s)
_FH Output
Heating or cooling mode
21
22
Hystersis temperature(0.1C)
Stop heating/cooling
23
Enable safety protection
24
->temperature source
25
->active protection(0...99C)
26
->active operation
27
Guangzhou Hedong Electric Co., Ltd. (HDL)
-Enable
-No
-Yes
-No
-Yes
-No
-Yes
(5)...255s
-Heating
-Cooling
1...(40)...200C
-YES
-NO
-No
-Yes
-Local sensor
-Via EIB
0...(35)...99C
-Unchange
-ON
-
www.hdlautomation.com
ouput of the relay actuator.
Set yes or no display date and
time.
Set yes or no display information
in information zone.
Set yes or no display picture of the
controlled device.
Set the time interval of scrolling
information displayed.
Set the function mode as heating
or cooling.
Set the hystersis temperature.
Set yes or no stop heating/cooling.
Set yes or no enable safety
protection.
Local sensor: The temperature is
depend on sensor itself.
Via EIB: The temperature is
depend on other devices via EIB.
Set the temperature of active
protection.
Unchange: In the state of safety
protection, the active operation is
61 / 88
Advertisement
