Advertisement
APPLICATION PROGRAM INFORMATION–LCDPanelController (V1.1), M/DLP04.1-A2-48- Version 1.1
D.2 FCU
Objects "HVAC temperature"
NO.
Object name
HVAC Fan
160
HVAC Actual
160
temperature
The temperature value can be transmited to KNX bus.HVAC or FCU on the KNX bus can receiving.
HVAC Actual
161
temperature
HVAC Actual
162
temperature
An error signal can be received from KNX/EIB with these objects.Telegram value: "0": No error, "1":
Error.
Objects "HVAC Setpoint"
NO.
Object name
HVAC Setpoint
163
The temperature value can be transmited to KNX bus.HVAC or FCU on the KNX bus can receiving the
temperature as base setpoint temperature.
HVAC Setpoint
164
This object can receive the Instantaneous temperature via KNX bus.
Objects "HVAC control mode"
NO.
Object name
165
HVAC control mode
Guangzhou Hedong Electric Co., Ltd. (HDL)
Function
Temperature from EIB
Actual temperature
Actual tem.error signal
Frost/heat alarm error signal
Function
Base setpoint temperature
Instantaneous setpoint
temperature
Function
HVAC control mode(byte)
-
www.hdlautomation.com
Flags
Data type
DPT 9.001
CWU
2 bytes
DPT 9.001
CWTU
2 bytes
DPT 1.005
CWTU
1bit
DPT 1.005
CWTU
1bit
Flags
Data type
DPT 9.001
CWTU
2 byte
DPT 9.001
CWTU
2 byte
Flags
Data type
CWTU
DPT 20.105
78 / 88
Advertisement
