Table of Contents
Advertisement
Technical Information
PVG-EX 32 Proportional Valve Group
PVSKM Full Flow Cut Off Modules
126 |
©
Danfoss | June 2019
The PVG-EX 32 PVSKM inline full flow cut-off module, also referred to as full flow cut-off modules, enables
an integrated full flow cut-off and High Pressure Carry Over (HPCO) functionality by means of the
integrated PVSKM spool, controlled either manually, hydraulically or electrohydraulically.
The PVG-EX 32 PVSKM modules, also referred to as full flow cut-off modules, inline full flow cut-off of flow
or as an HPCO, High Pressure Carry Over port.
The PVSKM module allows a position anywhere in the PVG-EX 32 valve group, similar to a standard PVG-
EX 32 basic module. The freedom of position of the PVSKM module in the PVG-EX 32 valve group enables
a full flow cut-off, of the entire valve group, by placing the PVSKM right after the PVP inlet module, or
only a part of the valve group, by placing the PVSKM elsewhere in the valve group.
The PVSKM module variants are based on a generic platform with a wide selection of additional features,
enabling you to tailor the valve stack to comply with Category 2 or 3 safety systems according to ISO
13849.
The PVSKM Full Flow Cut-Off Module features:
•
Threaded port for HPCO port
•
Optional T0 facility and external T0 port
•
Different PVSKM spool types depending on requested HPCO flow capacity
PVSKM Full Flow Cut Off module
PVSKM schematic
1
0
2
HPCO
BC290860493426en-000103
Advertisement
Table of Contents
