Festo CP Factory Manual page 2

Mr buffer and palletizing robot

Hide thumbs Also See for CP Factory:

Table of Contents

Order number:

Status:

Layout:

File Name:

Internet: www.festo-didactic.com

E-Mail: did@de.festo.com

Intended use

This installation was developed and manufactured only for the use in basic and further training in

the fields of automation and communications. The training company and/or the training staff must

ensure that the trainees observe the safety precautions described in the accompanying manuals.

Furthermore this manual describes setup and possible uses of the singular stations. It contains all

information and data required for commissioning, maintenance and operation.

Festo Didactic accepts no liability for injury or harm to trainees, the training company and/or any

third parties which may occur when the installation is used beyond a genuine training situation,

except Festo Didactic has caused such injury or harm intentionally or by grossly negligence.

Experimenting on CP Factory / CP Lab systems with hazardous live voltage is not allowed.

This manual, all text and illustrations included, is protected by copyright. Any utilization outside the

limits of the copyright law and other than training purposes are not permissible without our definite

approval. This applies in particular to reproductions, operations, translations, micro filming and the

storing and processing into electronic systems. Distribution of this documentation, as well as

reproduction, use and spread of its contents is prohibited, insofar not permitted explicitly. Offences

concerning patents, designs for use and patterns.

Intended use also comprises observing all instructions in the operating manual and carrying out the

inspection and maintenance works.

02/2018

02/2018, Schober, Weiss

CP-F-BUFROB-B-RV4FL-GB-A002.doc

Table of Contents

Need help?

Do you have a question about the CP Factory and is the answer not in the manual?

Cp lab