Introduction; Warranty And Liability; Important Information - Festo CP Factory Manual

2 Introduction

2.1 Warranty and liability

Basically, our "General Terms and Conditions" apply, which have been made available for the user since the
conclusion of the contract at the latest.
Any warranty and liability claims for personal or material damage will be excluded, if they result from one or
more of the following causes:
•
any non-intended use of the system
•
any improper mounting, commissioning, operating and servicing of the system
•
any operating of the system with faulty safety devices or safety and protective devices which have not
been mounted properly or are not functioning
•
any disregarding of the information in the manual concerning transport, storage, mounting,
commissioning, operation, servicing and setting-up of the system
•
any unauthorized constructional alterations on the system
• insufficient monitoring of installation parts which are subject to wear and tear
•
any improperly executed repairs
•
any major emergencies caused by external influence and force majeure.
Festo Didactic herewith rules out any legal responsibility for damages of the trainee, the training company
and/or a third party which might occur when using the system beyond a genuine training situation, unless
the damage has been caused by Festo Didactic intentionally or due to gross negligence.

2.2 Important information

Knowing the basic safety instructions and the safety rules is a basic prerequisite for the safe handling and
the trouble-free operation of the system.
This manual contains the most important information in order to operate the system in a way that meets the
safety demands.
The safety instructions in particular have to be observed by any person working with the system.
Furthermore all rules and instructions concerning accident prevention applying to the deployment location
have to be observed.
© Festo Didactic CP Factory / CP Lab ° MR Buffer and palletizing robot
Introduction
11