Introduction; Mangoh Red Components And Accessories - mangOH Red User Manual

1: Introduction

Table 1-1: mangOH Red Required and Optional Components
Item
mangOH Red
(Included in kit)
CF3 module(s)
(Included in kit)
CF3 module cover and
cover removal tool
(Included in kit)
Micro-USB cables
(Included in kit)
Rev 2 May.17
This user guide explains how to set up and begin using the mangOH™ Red with CF3
(Common Flexible Form Factor) modules.
Once you have the mangOH Red set up, visit
documentation, code samples, and other materials.
Note: Described functionality is for mangOH Red (DV3 version). Photographs of mangOH Red
(DV2 version) will be updated in the next release of this document.

mangOH Red Components and Accessories

Table 1-1 details the required and optional components needed to begin using the
mangOH Red in your development environment. Some of these components are
available in mangOH Red development kits (kit contents are supplier-dependent).
Pre-configured development board for CF3 modules
The module in the kit includes a cellular modem and an application processor
running Legato, an open source embedded platform built on Linux for hosting
IoT applications (see legato.io
See Table 1-2 on page 7 for compatible Sierra Wireless modules.
Note: Not all supported Sierra Wireless modules include application processors.
Industrial-quality snap-in module cover, plus cover removal tool to disconnect the cover from the
mangOH Red
Note: The cover and tool shown are for WP-series modules. A
similar cover and tool (not displayed) are used for HL-series
modules.)
Connect computer to the mangOH Red for communication and
to provide power for non-transmitting tests.
mangoh.io
Details
for details).
6
for developer
41110400
1